Brief Summary
Are you ready for an outboard that uses a 32-bit computer to control its operating functions? Put away that pull-cord and listen up, class is in session.
Suzuki’s new DF 200 and DF 225 4-stroke outboards share a 3.6-liter DOHC, 24-valve V6 engine topped with a multi-stage induction manifold. The manifold actually has two runner tracks, one for low speeds and one for wide open throttle. From idle to a preset threshold, air enters into the longer, curved pipe, which creates more torque than horsepower. As your throttle position and operating speed increase, a valve closes this passage and air flows in a straight-line into the combustion chambers for maximum horsepower. This means quicker planing times and more top end at lower rpms.
Suzuki also stuffed a Two-Stage Cam Drive System into the block, which enables the use of smaller cam sprockets. Smaller sprockets allow reduced valve angles, which in turn, reduce the block size. The DF 200 and DF 225 abandon the tradit
Key Features
Specifications
| Type of Engine | 4-Stroke |
|---|---|
| Number of Cylinders | 6 |
| Horse Power | 200 |
| Configuration | V-drive |
| Weight | 580.00lbs |
| Fuel Type | Gasoline |
| Fuel Delivery | Fuel Injected |
| Shaft Length Options | 25 in |
| Shift Throttle Control | |
| Displacement | 220.50cu in |
| Steering Control | Power Assist |
| Recommended Fuel | |
| Alternator Output | 12v 54amp/3000 rpm |
| CARB Rating | 3-Star |
| Engine Monitoring System |