Choose One or All to Start Looking

Engines Search

Search For

Hatteras GT60 (2011-)
(w/ Currently no test numbers)

Now playing: 

Hatteras - HattCON


Join BoatTest for FREE Now!


Own a boat? Please fill out the following options.

By submitting this form, you acknowledge that you have read and agree with the Privacy Policy & Terms of Use of

Enter in your email below to view all content

Do you have a question?Ask a question about this boat or engine?
See the PRICE by becoming a BoatTEST member.
(It's quick and FREE!)

Brief Summary

Last month at the Miami Boat Show Hatteras introduced its new Hatteras 60 GT. The exterior design looks similar to the previous Hatteras 60 Convertible, but there are other design elements that remind us of the classic Rybovich look. For example, the addition of teak cap rails and trim at the base of the flying bridge are all the Palm Beach-look. The boat’s ample 19’ beam permits spacious accommodations and the salon has been reconfigured. The cockpit has been redesigned to give it more utility. Hatteras now offers as an option flying bridge arrangement a more traditional layout with a navigator/companion seat to the right of the skipper plus more comfortable seating. Further, Hatteras tells us that the pricing on the new boat is sharp, and is about the same as boats several feet shorter. But there is more that sets this boat apart than the refinement of features mentioned above.

Key Features

  • Blister-resistant vinylester resin in hull bottom skin coat
  • Hull and superstructure linear polyester/ polyurethane coating
  • Hull sides and superstructure laminated with PVC foam core
  • Wood bulkheads, cabinetry and trim with a satin or high-gloss polyester finish in cherry or African mahogany
  • One 21.5kW freshwater-cooled electronic quiet diesel Onan generator(D)
  • Two 24 volt banks of heavy-duty, 12 volt marine batteries (6) mounted in fire retardant fiberglass boxes
  • Molded fiberglass, 153 square feet including mezzanine with seating
  • Polished anodized aluminum ladder to flybridge with acrylic steps
  • Seawater and freshwater wash down outlets
  • Bait and tackle center with 3 drawers, cutting board, and gaff storage covered by door
  • Specifications

    Length Overall 62' 2''
    18.95 m
    Beam 62' 2''
    18.95 m
    Dry Weight 90,000 lbs.
    40,823 kg
    Tested Weight N/A
    Draft 4' 10''
    1.47 m
    - Draft Up N/A
    - Draft Down N/A
    - Air Draft N/A
    Deadrise/Transom N/A
    Max Headroom 6' 6''
    1.98 m
    Bridge Clearance N/A
    Weight Capacity N/A
    Person Capacity N/A
    Fuel Capacity 1,500 gal.
    5,678 L
    Water Capacity 200 gal.
    757 L
    Length on Trailer N/A
    Height on Trailer N/A
    Trailer Weight N/A
    Total Weight
    (Trailer, Boat, & Engine)

    Prices, features, designs, and equipment are subject to change. Please see your local dealer or visit the builder's website for the latest information available on this boat model.

    Engine Options

    Std. Power Not Available
    Tested Power Currently no test numbers
    Opt. Power Twin CAT C32 Diesel Engines 1600 BHP
    Twin CAT C32 Diesel Engines 1800 BHP
    Twin CAT C32 ACERT Diesel Engines 1800 BHP

    Hatteras GT60 (2011-) Line Drawing


    Captain's Report

    Hatteras GT60
    Carolina sportfishermen have a distinctive profile, a nice balance between foredeck, deckhouse and cockpit. Hatteras interpreted this traditional style in designing the GT60 (and the other boats in the GT Series, not yet introduced), but instead of the cold-molded wooden construction favored by local boatbuilders, Hatteras built the new boat with resin-infused fiberglass laminate. Resin infusion produces a light, strong hull, necessary for reaching the top speed that Hatteras wanted in the GT60.

    The new Hatteras GT60 has the same hull, with its distinctive tumblehome at the transom, and its “Carolina Flare” bow. Her 19’ beam has enabled a clever design of the accommodations plan which now has three staterooms, each with en suite heads (and even 4 staterooms with 3 heads is an option) – all of this without giving up the washer/dryer. And just like her predecessor, with larger engines this 90,000-lb. (40,823 kg.) -- fully loaded -- battlewagon is able to go over 40 knots, we’re told by the builder.

    The Back Story

    Let’s not forget that that the origin of Hatteras Yachts exactly 50 years ago was big game fishing off the Carolina Coast. There, the continental shelf lies some 60 miles or so from the nearest inlet in the Outer Banks, and maybe 100 miles from a home port. It is there that you’ll find Diamond Shoals which is generally regarded to be the graveyard of the Atlantic.

    Hatteras GT60
    This is what a sportfisherman's flying bridge should look like. The helm is situated far enough aft that the skipper can watch the cockpit action without leaving the wheel. A single swivel chair is standard, second one optional. Single-lever controls (electronic) let him spin the boat like a ballerina on pointe. All the instrumentation lives under cover when not in use, as do the nav units; naturally, everything is state-of-the-art, and every conceivable gauge and monitor is included. There's rod stowage under both bench seats. An enclosed flying bridge is optional, and transforms the space into an upper salon.

    And that is still where you’ll find Hatteras Yachts today, in New Bern, NC, the heart of big game fishing country. In this day of “hybrid” boats designed for both cruising and fishing, it is refreshing to see a boat being built that is a no-compromise fishing machine. Having said that, of course the Hatteras GT60 can be cruised, and with three or four staterooms, mez seating in the cockpit and a guest-friendly flying bridge, this GT60 takes a back seat to no one for cruising. She is an elegant convertible.

    Type-A Owner/Operator/Angler

    We happen to like 60’ convertibles. The reason is that such a boat is large enough not to have to make compromises on accommodations, yet small enough to be easily manageable without having to hire an army to operate and maintain it. It is a perfect size for an owner/operator. And, it is relatively easy to find dock space for a 60-footer.The Hatteras GT60 deviates from the previous Hatteras 60 convertible because it is lighter, faster, and more powerful, and designed for the tournament angler who is competitive both in the fighting chair and in the helm seat – in short, it is designed for the “Type-A Angler.” With twin Cat C32 ACERT diesel engines with 1900-hp each, deep-ratio reduction gears, and six or seven-blade nibral props, the GT60 can take on all comers racing to the fishing grounds.

    Hatteras GT60
    Some fishermen wouldn't care if their boat was finished belowdecks in bare plywood, as long as they had a big, functional cockpit. No fear aboard the GT60: There's lots of room for the chair, and ample clearance for the mates to work around an angler fighting a trophy fish. The mezzanine is wide enough for plenty of admirers, and shaded by the flying bridge overhang. Note the hawse holes in the transom, rather than ruining the beautiful teak covering boards or interfering with the sensuous tumblehome at the stern. The cockpit includes a tackle center, bait freezer, and under-sole fishboxes; a live well in the transom is optional.

    The Hatteras GT60 carries 1,500 gal. (5,678 L) of fuel (with an auxiliary 250 gallon tank available as an option). The boat was designed for the man who is drawn to high-stakes big game tournaments in distant locations -- places like Puerto Rico, the Virgin Islands, Venezuela, Costa Rica, Mexico and the Bahamas, to say nothing of fishing farther afield, in places such as Panama, Ecuador or Brazil. The boat has the range to hopscotch across the Caribbean from port to port – or across the Med, or up to Lizard Island from Sydney. It has the speed to take advantage of smooth water and scoot, and the strength to punch through and ride over the rough stuff when things get nasty.

    How is She Different from the Competition?

    Convertibles in the 60-foot range from major builders of battlewagons are notoriously similar in interior layout, cockpit fishing amenities and even in general exterior appearance. If one builder gets a new bright idea, it is copied by the others before the next boat show. The top-tier builders all use best practices of construction, their interiors all look pretty. So where are the differences? They are there – you just have to look closely.

    The Hatteras GT60 Hull

    Possibly the biggest difference among these boats occurs in their hulls and bottom shapes – just the thing you are least likely to see because they are below the waterline. If you have not experienced the latest generation of Hatteras hulls, then you need to do it. The latest Hatteras 60 hull is much more like a traditional Carolina Outer Banks design. It is also significantly different than its primary competition – different from the flatter-bottom boats of some builders and the deep-V hulls of other brands.

    Hatteras GT60
    Large windows provide plenty of light in the salon, one feature that differentiates the GT60 from Hatteras's elder 60 Convertible. The galley should satisfy even finicky chefs, with lots of counter space and a full complement of appliances, including two under-counter refrigerator/freezers and a four-burner cooktop. The dinette is an easy reach away. In the salon proper, there's a 42" LCD TV and a Bose home theater. Air conditioning vents are concealed in the valences, and both smoke and CO detectors are standard. And, since this is a Hatteras, there's more rod stowage under the L-lounge.

    The Hatteras GT60 hull has a sharp entry, yet the bow section is convex, aiding the smooth ride and dampening the effects of heavy seas. The hull then warps to a moderate deadrise at the transom. There is a lot of bow flare in the 60. It’s called “Carolina Flare” because it was first made famous by the custom sportfishing boat builders in a dozen small boat yards on North Carolina’s Outer Banks. Unless you are used to it or have seen it in action, it may look odd at first. But trust us, there is simply nothing quite like it to turn water aside in a rough sea when going fast, and it is more likely to keep the flying bridge and the cockpit dry in a bow-on or beam wind than any other bow shape we can think of.

    Hatteras GT60
    Depending on the layout, the queen-sized master berth is either athwartships or fore-and-aft; we're old-fashioned and prefer a fore-and-aft berth, but it really makes no difference: In both cases the master stateroom is big and comfortable. There's plenty of room around the berth, nightstands on both sides, a dresser and plenty of hanging-locker capacity – cedar-lined, of course. There's low-voltage lights under the berth and dimmable lights overhead for creating atmosphere when the time is right, and a 32" TV for the rest of the time. The fabric headliner is installed on tracks, so it's easily removable for service access, a detail many builders overlook. Nobody engineers their boats better than Hatteras – they are not just pretty faces, but rugged go-to-sea boats, too.

    The hull also has a double chine which is important. Once on plane, the hull has less wetted surface and less resistance because its waterline beam is narrower. This translates into slightly more speed, or better fuel economy, not that you are counting dollars. The second chine is above the waterline and knocks down spray and is another detail that helps keep the topsides dry. It also gives extra interior volume because it is stepped out about 6” both port and starboard. A third benefit of the double chine is to present added buoyancy when the boat is at anchor or trolling and rolling. As the boat rolls the second chine digs in offering buoyancy to slow the rock. And, because the hull is not a deep-V, it is less rolly in the first place.

    Tunnels in the Hull

    Hatteras uses propeller pockets or tunnels on the 60’s hull in order to get increased performance and also to reduce the boat’s draft. The tunnels are semicircular affairs that permit a shallower down angle for the drive shaft and thus better thrust forward, rather than up. Secondly, the hull bottom itself, in the top and on the sides of the tunnel, creates an “end-plate effect” which also directs energy aft, rather than out to the sides. (Ever noticed that the wing tips of commercial airliners are turned up to vertical? Those are the “end plates” and they give the wings slightly more lift than without them.)

    Hatteras GT60
    Hatteras offers four layouts, each one centered around a midships master stateroom. The standard layouts, second and third from left, have three staterooms and three heads; the difference is whether the forward cabin has a double or V berths. An optional four-stateroom arrangement (left, above) robs from the heads to make room for an upper-and-lower cabin. The fourth arrangement, right, moves the galley down and creates separate crew's quarters; many owners of the GT60 will carry at least one mate, maybe two if they are serious tournament fishermen. In practice, Hatteras will work with owners to mix and match components to create the perfect arrangement.

    Hatteras also employs lifting strakes in order to add flat running surfaces to the bottom to increase speed without measurably diminishing the cushioning effect of the modified-V hull. Together, all of these details produce a hull that is more easily driven, comfortable in rough chop, and less rolly at anchor or when trolling. So you see, while all the major brands of 60-something convertibles may look pretty much the same above the waterline, there is a world of difference below it.

    Construction is Different, Too

    Truth be told, when Willis Slane and his partners built the first 41’ Hatteras in 1960 – named “Knit Wits” – they really didn’t know exactly how thick a fiberglass hull should be. The material was relatively new to powerboats and few, if any, had been built as large as 40’ at that time. So what did they do? They did the same thing that you would do if you knew you were going over Diamond Shoals – they over-built it! For years afterward Hatteras was known for its thick (and heavy) fiberglass hulls. In fact "Knit Wits" is still in use today, probably the oldest large fiberglass powerboat afloat, and it is a testament to good Hatteras construction right from the beginning.In the modern era, Hatteras has become as concerned about weight as the rest of the world. Indeed, when a new Hatteras 60 convertible was introduced a few years ago it was approximately 15,000 lbs lighter than it predecessor. The new GT60 is 5,000 to 8,000 lbs lighter than the 60C. Nevertheless, the Hatteras 60 hull under the waterline – like all Hatteras vessels – is still all solid fiberglass. This builder does not use balsa core or any other core material in its hulls below the waterline, unlike some other builders. This is another important aspect that sets Hatteras apart.

    Which Method is Best?

    The boating industry is sharply divided on this issue. The reason is that the advent of vinylester resin some 15 or 20 years ago has stopped water osmosis through fiberglass hulls. Today, all quality boat builders use anywhere from one to five layers of vinylester resin in the outer skin of their hulls before applying the less expensive (and permeable under hydrostatic pressure) polyester resin. (Some builders use nothing but the expensive vinylester resin in their hulls.) Builders using balsa core in their bottoms contend that they run no risk of water migration, and at the same time pick up both the strength that sandwich construction provides as well as saving lots of weight. We’re told that neither process costs significantly less than the other and that no builder does it one way or the other to save money. You will find the highest quality builders with the highest integrity on both sides of this issue. And both will warranty their hulls for 10 years or more. So take your pick, and maybe it makes no difference, other than one hull is lighter than the other.In this regard, Hatteras is a more traditional builder. On the other hand, Hatteras does use a non-absorbent foam core in its hull sides above the waterline and in its superstructures and in its decks to save weight.

    Hatteras GT60
    Power options are three versions of Caterpillar C32A diesels: 1600-, 1800- or 1900-hp. When you're investing in a boat like the GT60, go for the maximum power – someday you'll want the 41 knots the big Cats bring to the party. (That's according to Hatteras; we are eager to test this boat, but haven't done so yet.) You can always throttle down. The enclosed bridge will probably cost a bit of speed, but we don't know how much. If you're serious about fishing, you'll want the open bridge – at least we would. Folks in the market for a boat like the GT60 will also shop Bertram and Viking, both excellent builders who produce first-class sportfishermen. But we think the Hatteras GT60 will take a lot of beating. It's what Carolina fishing boats are all about, but built for the 21st century.

    Hull to Deck Bonding

    There are few areas of the boat that are as important, as are the method and materials used, to connect the hull to the deck of any boat, power or sail. Here again Hatteras uses the traditional “best practices” system and one that some powerboat builders have gotten away from with the introduction of high-strength bonding agents such as 3M’s 5200 or compounds like it. Hatteras uses tried and proven “shoe-box” construction whereby the deck flange fits over the side of the hull like a shoe box. A high-strength modern adhesive, such as the ones mentioned above, is applied between these two surfaces. Then Hatteras puts in monel screws on three-inch centers, fastening the deck to the hull mechanically. After that, the joint is fiberglassed over on the inside. This is as good as a hull-deck joint gets in boat building.

    Why is this so important?

    For two reasons: 1) Adhesive-only joints, if not 100% perfectly done, can leak. And a leak here is like one in your deck or in the roof of your house – it is very difficult to determine where the water is actually getting in as it may be a long way from where it is coming out on the other side. By glassing the joint completely on the inside -- which can be visually inspected -- the builder knows that this joint will not leak and is chemically bonded.

    Hatteras GT60
    We think that the look of the new Hatteras GT60 GT is sheer poetry in motion, a well-done combination of modern, graceful lines in the Outer Banks and Palm Beach tradition.

    2) The last thing that you want to happen when punching into closely spaced 10’ to 12’ seas offshore is to have your deck get peeled back like a sardine can. While we have not heard of this happening lately on offshore fishermen in this class, we still hear about it happening from time to time on sailboats (particularly older ones) and occasionally on high performance boats. The force and power of massive amounts of green water washing across your foredeck puts tremendous strain on the stanchions, bow pulpit, and the hull-to-deck joint. Remember, in these kinds of conditions, no matter who builds your boat and what material it is made of, the hull is working. The bow is oil-canning in and out to some degree and the whole hull might be wracking and twisting a bit as the sea puts different pressures on different parts of the boat. By using the construction method Hatteras uses with the shoe box construction that is glued, screwed and glassed, you know it won’t come apart.


    The Hatteras 60 is probably the most popular model the North Carolina boat builder makes. There are many of these models being “field tested” each day all over the world. Little wonder, then, that Hatteras designers are sensitive to owner input, and we find ourselves agreeing with every one of the major changes that Hatteras has made to the new GT60. They have made a very good boat even better, in our opinion.

    Standard and Optional Features

    Marine Electronics

    VHF Radio Standard


    Air Cond./Heat Standard
    Battery Charger/Converter Standard
    CD Stereo Standard
    Dripless Shaft Seals Standard
    Head: Fixed Standard
    Power Steering Standard Hydraulic power-assisted
    Shore Power Standard
    Trim Tabs Standard
    TV/DVD Standard
    Washdown: Fresh Water Standard
    Washdown: Raw Water Standard
    Water Heater Standard


    Icemaker Optional
    Microwave Standard
    Refrigerator Standard
    Stove Standard

    Exterior Features

    Outlet: 12-Volt Acc Standard
    Swim Platform Optional
    Transom Door Standard
    Wet bar Optional

    Boats More Than 30 Feet

    Engine Synchronizer Optional
    Freezer Standard Bait Freezer
    Generator Standard
    Helm: Second Station Optional
    Washer/Dryer Standard


    Full Warranty Information on this brand coming soon!

    See the PRICE by becoming a BoatTEST member.
    (It's quick and FREE!)