Mercury - Marine 150 Pro XS Outboard Loaded with Innovation

Boattest Logo

Captain's Report

Mercury Marine 150 Pro XS Outboard

The Mercury 150 Pro XS is designed for a variety of boats, but tournament anglers will like its light weight of 456 lbs. (207 kg).

Acceleration


Mercury says the 150 Pro XS offers quick heavy-load acceleration from zero to 20 mph. The acceleration is likely helped in part by the outboard’s 456-pound (207 kg) weight as well as its 3.0-liter displacement, which Mercury says is the largest in the 150-hp category. Torque is important for good hole-shot times, and Mercury says its proprietary Transient Spark Technology optimizes the timing of the spark for improved performance.


Mercury Marine 150 Pro XS Outboard
When it comes to hole shot, high torque at the low end is important, and Mercury says the 150 Pro XS has features that optimize the torque.

Design Features


Mercury gave the 150 Pro XS other features, such as a higher full-throttle RPM. Instead of 5800 rpm, the outboard will hit 6000, which increases the range of propeller pitches it can handle, according to the manufacturer. The outboard has a gearcase with 2.08:1 reduction, also delivering more torque to the prop shaft.


In addition, the gearcase has four additional water pickups on the nose of the lower-unit torpedo as well as the standard pickups located on the sides. Mercury says this design enhances flexibility in mounting the engine and allows the use of a jackplate while also letting the user trim the engine more aggressively without a loss of engine-cooling water flow.


Charging Power


The 150 Pro XS has a charging output of 60 amps, and idle-charge battery management capability, the better to manage battery drain from onboard electrical and electronic components, according to the manufacturer.


Mercury Marine 150 Pro XS Outboard
Mercury says the 150 Pro XS has reduced vibration at the seat and helm compared to others in the 150-hp high-output segment.

Corrosion Protection


The 150 Pro XS provides superior protection against corrosion, according to Mercury, which cites its use of proprietary ultra-low-copper alloys. This is a claim that is generally accepted as true in the industry. Mercury provides a standard three-year warranty against damage due to corrosion.


Mercury Marine 150 Pro XS Outboard
The 150 Pro XS uses performance-tuned engine mounts that Mercury says improves handling at high speeds.

For more information, visit www.mercurymarine.com


Specifications



    HP / kW: 150 / 110


    Engine type: 8-valve single overhead cam (SOHC) Inline 4


    Displacement (CID/CC): 183


    Displacement (L): 3.0


    Full throttle RPM: 5200-6000


    Air induction: Performance-Tuned Scroll Intake Manifold


    Fuel induction system: Computer Controlled Multi-Port Electronic Fuel Injection (EFI)


    Recommended fuel: Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum


    Recommended oil NMMA Certified FCW SAE 10W-30


    Engine protection operator warning system: SmartCraft Engine Guardian


    Compatible with SmartCraft digital technology: Yes


    Starting: Electric (turn-key)


    Controls: Mechanical throttle & shift


    Steering: Dual-cable mechanical hydraulic power steering


    Shaft length: 20" / 508 mm, 25" / 635 mm


    Dry weight (lb./kg): 456/207


    CARB star rating: 3


    Bore and stroke: 4.0" x 3.6" / 102mm x 92mm


    Ignition: SmartCraft ECM 07 Digital Inductive


    Cooling system: Water-cooled with thermostat


    Gear shift: F-N-R


    Trim system: Power Tilt/Power Trim


    Exhaust system: Through prop


    Oil Capacity: 6.3 qts / 6.0L