Carolina Skiffs can be seen at both recreational boat marinas and those populated predominately by workboats owned by commercial fishermen. The Carolina Skiff DLV 198 can handle hard fishing as proven by serious meat fishermen, but she can also convert instantly to a family-friendly boat with little more than a hose off and adding some cushions.
Center 18 gallon livewell
Stainless steel jump seat hinges
Premium high-gloss gelcoat
Large area to flush mount electronics
6 flush mount console rod holder
Rear deck with jump seats
Short front deck with non skid
SS cooler frame with 70 quart removable cooler
Carolina Skiff DLV 198 (2014-) Specifications
19' 0'' 5.79 m
1,660 lbs. 753 kg
96'' 244 cm
2,665 lbs. 1,209 kg
9'' 23 cm
30 gal. 114 L
Prices, features, designs, and equipment are subject to change. Please see your local dealer or visit the builder's website for the latest information available on this boat model.
The Carolina Skiff 198 DLV has a LOA of 19’ (5.79 m), and a beam of 96” (244 cm). Our test boat was powered by the new Evinrude E-TEC 90 H.O.
The mission of the Carolina Skiff 198 DLV is to serve as a tough-as-nails personal utility boat that can seamlessly blend the functions of a fishboat with a family day boat. With a hull draft of only 9” (23cm) she can venture into skinny water where other boats wouldn’t stand a chance. And as a platform for window shopping the nooks and crannies of waterfront real estate, she shines even more. That low draft also enables her to sneak into the far reaches of coastal rivers and tidal creeks -- and be tied up at a dock that has skinny water during moon tides.
The red hull stripe is one of 8 color options available for the 198 DLV.
Things We Like
• Steps to Casting Deck. Both the bow and stern casting decks have steps to the sides making a transition that much easier.
• Flip-Down Aft Jump Seats. This makes a comfortable place to sit and converts it easily into a workspace for fishing or cast-netting.
• Dual Livewells. The 198 DLV features a livewell at the stern casting deck and another under the forward console seat.
• Carry-on Cooler. This makes it so much easier to take the catch home while still keeping it all iced down. And for the families it makes much more sense to load the cooler at home and bring everything onboard in one single container.
Things We’d Like to See
• Bow Cleat. So we can anchor from the center of the bow, rather than the cleats off to the sides. (This can be installed in the aftermarket.)
• Tool Holder. What’s a fishing boat without easy to reach knife and pliers?
• Cutting Surface. An easy add-on to cut bait, and some types of fish need to be gutted as soon as they are boated.
Her high-gloss finish flies in the face of the tough-as-nails reputation of the Carolina Skiff brand.
The Evinrude E-TEC 90 H.O. is Key. This is the first test we’ve performed with this new Evinrude E-TEC 90 H.O. engine and it was revealing. This engine is not an up-graded version of the standard 3-cylinder Evinrude E-TEC 90, but rather a de-tuned version of the 4-cylinder Evinrude E-TEC 115. This added displacement -- 33% (105 cu. in. vs 79 cu.in.) -- gives the engine remarkable low-end torque.
More Power. That, together with the fact that the Society of Automotive Engineers (SAE) permit engine makers to have 10% leeway on actual horsepower over or under stated horsepower, means in the case of the Evinrude E-TEC 90 H.O., that it actually has something on the order of 99 horsepower. This added displacement and horsepower simply give the engine better performance in hot weather in addition to more low-end torque than standard 90-hp engines.
The Carolina Skiff 198 DLV Test
The Carolina Skiff 198 DLV has a LOA of 19’ (5.79 m), and a beam of 96’’ (244 cm). With an empty weight of 1,660 lbs. (753 kg) full fuel, two people plus the 405 lb. (184 kg) test engine, we had an estimated test weight of 2,665 lbs. (1,209 kg).
WOT Speed. With the Evinrude E-TEC 90 H.O. turning a 3 bladed 14-¾" x 17" Viper propeller, we reached a top speed of 42.1 mph at 5700 rpm. At that speed fuel burn was only 11 gph which translates into a range of 103 miles.
Best Cruise. When dialed back to a best cruise speed of 3000 rpm, we were running at a respectable 17.9 mph while burning fuel at a rate of 3.5 gph. That meant that we could keep going for nearly 8 hours and 138 statute miles while still holding back a 10% reserve.
The 198 DLV hull allows the boat to cling to the water in turns while still allowing for a shallow draft. Her hull shape maximizes stability and her 10-degree deadrise at the stern makes her fuel-efficient.
In our opinion, the single most important aspect of this engine’s performance is her low-end torque. We reached planing speed in only 2.8 seconds...accelerated to 20 mph in 5.3 seconds, and continued through 30 mph in 7.8 seconds. That’s indicative of how Evinrude shifted the major portion of the power from the top end of the rpm range to the low end, around 1000 to 3000 rpms, where a boat full of friends will need power to get up on top of the water, and take skiers there with it. It’s also advantageous on a boat like this with a relatively flat bottom.
When hitting the throttle her bow comes up nearly 12-degrees and that seems to have a lot to do with the fact that for this model year Carolina Skiff moved the fuel tank aft, and therefore the center of gravity is moved aft. But we never lost visibility past the bow thanks to the Evinrude E-TEC 90 H.O.’s low torque and quick planing speeds.
With the fuel moved aft she has a higher bow rise, but the Evinrude E-TEC 90 H.O. was able to power through it in short order. Time to plane was 2.8 seconds.
Ride. She’s a flats boat with only a 9” (23 cm) draft and hull designed for stability and use in protected water so she did give a bit of a slap as we rode through light chop. Her real advantage lies in getting into skinny water where others fear to tread. While she had no trouble taking the chop and wakes we transitioned through, it was clear that she’s more at home in coastal areas and protected waters.
Dual Casting Decks
One of the most significant features of the 198 DLV is her dual casting decks. Both are easily accessed with steps to the sides and both are roomy enough to move about with no fear of losing balance or grip on the non-skid surface. A split bow rail can be added as an option.
Storage. The bow deck has two storage compartments laid out in a V configuration. Both have hatches that close against molded channels that direct water away from the compartment and onto the deck where it makes its way out the deck drains and ultimately overboard.
Steps to either side allow for easy access to the bow casting deck. This is a practical design and one that we have seen on only a few boats.
These bow compartments have interiors that follow the contours of the hull underneath and as such, present limited space. Basically the only useable portion is towards the aft end of them. And one will have to be used to hold the anchor and line.
Anchoring Details. We would like to see a cleat located at the bow for when we anchor to bottom fish. This keeps the boat more inline with the prevailing wind and therefore the waves. Using the side-mounted cleats would have us presenting our bow to the waves at an angle which is neither comfortable or, in some cases, safe.
The aft casting deck has the same access steps as the bow, and that’s a highly unusual feature. Much like the bow deck, this one is also treated with a non-skid surface. Two access hatches in the deck lead to the remote oil tank to port and the fuel tank to starboard. Just ahead is a curved section housing the 18-gallon (68 L) baitwell.
The deck remains roomy but a nice touch would be to add a raised lip surrounding the motor well to prevent accidently stepping into this area when reeling in a fish. That’s a time when one’s attention tends to be outside the boat, rather than where to step. For the same reason, flip-up, or pop-up cleats would be a good idea. Pedestal seats for both decks can be added as an option.
Even the aft casting deck has access steps to the sides. In the center is an 18-gallon (68 L) baitwell.
Jump Seats. Part of what makes this such a useful boat for both fishermen and families are the dual jump seats to either side of the aft deck. It makes a great place to ride out to the fishing grounds, or to the remote beach for a day of swimming and sunning. Both seatbacks are held in position with stainless hinges and a strap-and-snap holds the seats closed when not in use.
Both jump seats have custom embroidered backrest cushions and access below the cushions.
Moving to the helm, first we come to the helm seat. This one is a double wide, a feature we always appreciate as it allows for a second set of eyes looking forward. It also has a flip-type seat back to accommodate facing aft. Simply push down on the entire length and it releases the mechanism allowing for the conversion. With the seat facing aft, it’s in just the right spot to allow for putting the feet on the aft livewell to help stabilize the occupants when the rolling starts.
With the helm seat flipped to the rear-facing mode there is a perfect distance to the aft bulkhead for putting the feet up. Notice the custom embroidery again.
Under the helm seat is a 70-quart (66 L) carry-on cooler which makes great sense. It’s so much easier carrying the catch off in the container that they went into. From a family standpoint, it’s also easier to load a cooler with food and drinks for the day and just bring the whole thing aboard in one swoop.
The cooler is held in position with cargo netting and the seat bases are secured to the deck. Access is easy via the hinged seat base. When elevated, the seat remains up thanks to the thoughtful touch of adding dual gas struts leaving both hands free to focus on the cooler and it’s tasty contents.
The cooler is a carry-on type held in place with cargo netting. The gas struts hold up the seat base.
As for the helm itself, Carolina Skiff went with a port side mounted control station. A stainless wheel has a steering knob and is mounted to a tilt base. The engine controls are mounted to a 45-degree angle. The particular boat has the optional digital controls offered by this new Evinrude E-TEC 90 H.O. engine.
The helm is simple but functional. Space above will accommodate a fishfinder or GPS, or both, depending on the size.
Console Panel. Ahead, a carbon fiber panel houses the four white-faced gauges with chrome bezels. Just above are all the toggle switches arranged in a semi-circle with circuit breakers just below. One of these switches is the horn switch and there is no separation of type, color, or anything else that makes this switch stand out from the others. Why we keep seeing manufacturers fail to do so remains a mystery to us. But with that said, the prudent captain will scan to determine the horn location before getting underway. But at least they went with an actual horn and not the foolish electronic buzzers we’ve been seeing as of late.
Accessorize with Options
There’s plenty of room for added electronics. Depending on the size even two could be added but on most units the ability to combine a GPS and fish finder into a single unit would be more attractive here. To the sides of the console are three vertical rod holders to each side.
The caprails top out at 24” (61 cm) and that may be enough for adults, particularly those dragging a net over the rails. However, for families, it would be prudent to add the optional stainless rail package to increase the safety factor. A three-piece bow cushion set is also available creating a relaxing spot in the sun. For shade, we would definitely add either the 80” (203 cm) or 90” (229 cm) Bimini. If opting for the T-top an electronics box is available and then an aftermarket stereo will help round out the good times.
The caprails top out at 24” (61 cm) but an optional stainless steel side rail can be added to increase the level of safety.
Ahead of the console is the usual forward-facing seat, and this makes a total of 5 places to sit while underway, not counting the foredeck. Underneath the seat is a second baitwell so the person fishing at the bow doesn’t need to travel all the way back to the stern to re-load the hook.
There’s a good reason why the Carolina Skiff DLV 198s make such excellent workboats. They’re practically bullet proof and can take a load of punishment and still keep on going. We also find that the match between the 198 DLV and the Evinrude E-TEC 90 H.O. is a good one and likely gives performance that is comparable to the maximum rated 115 at a much lower cost.
Carolina Skiff DLV 198 (2014-) Test Result Highlights
Top speed for the Carolina Skiff DLV 198 (2014-) is 42.1 mph (67.8 kph), burning 11.0 gallons per hour (gph) or 41.64 liters per hour (lph).
Best cruise for the Carolina Skiff DLV 198 (2014-) is 17.9 mph (28.8 kph), and the boat gets 5.1 miles per gallon (mpg) or 2.17 kilometers per liter (kpl), giving the boat a cruising range of 138 miles (222.09 kilometers).
Tested power is 1 x 90-hp Evinrude E-TEC 90 H.O..
For complete test results including fuel consumption, range and sound levels go to our Test Results section.
Standard and Optional Equipment
Carolina Skiff DLV 198 (2014-) Standard and Optional Equipment
Washdown: Raw Water
= Standard = Optional
Carolina Skiff DLV 198 (2014-) Warranty
Carolina Skiff DLV 198 (2014-) Warranty Information
Warranties change from time to time. While BoatTEST.com has tried to ensure the most up-to-date warranty offered by each builder, it does not guarantee the accuracies of the information presented below. Please check with the boat builder or your local dealer before you buy any boat.
Full Warranty Information on this brand coming soon!
Members must log in to view the test results section.