Tips on preventing launching disasters
Some boaters may be in for a rude surprise when they find their boat sinks at the dock just after being put in the water. After combing through the BoatU.S. Marine Insurance claims files for the most common causes of springtime sinking, Seaworthy’s Editor Bob Adriance has the following tips for boaters:
- Hose clamps: Winterizing an engine in the fall often requires the removal of coolant hoses. But sometimes boaters are in a rush and the hoses aren't reattached and clamped properly. Adding to this, cramped engine boxes mean that the hoses and the clamps holding them sometimes can't be visually inspected easily. In the spring you'll need to ensure all of the hose clamps are securely tightened in place.
- Hoses: During the winter as the water inside them freezes, some hoses can lift off their attached seacock. However, with spring's warmer temperatures the water now returns to a liquid, and if the seacock was left open last fall, water can pour into the bilge. Double clamping with marine-rated stainless hose clamps, inspecting hose attachment locations, or keeping seacocks closed can save you from a spring sinking.
- Spring rains: Just 100 gallons of water weighs over 800 pounds so a boat with low freeboard only needs to sink a few inches before cockpit scuppers submerge and water starts to enter the boat. Larger boats with cracked or improperly caulked fittings that are located just above the waterline can also inadvertently let water in when they become submerged. Ensure that rain rolls off the boat and not into it.
- Sea strainer: For inboard/outboard and inboard powered boats, if not properly winterized the intake sea strainer can freeze over the winter, cracking or bending the inspection bowl. And if the seacock was left open the boat will sink as soon as ice in the strainer thaws or the boat is put in the water. Always inspect the strainer for cracks or other damage.
- Stuffing Box: On powerboats or sailboats with inboard power, if the stuffing box's packing material that seals the prop shaft is not tight, a steady drip will slowly swamp a boat. Also remember that no stuffing box should leak when the prop shaft is not moving. Stuffing boxes need to be inspected routinely, regardless of the season.
For more information visit http://www.BoatUS.com/seaworthy